MaxxSouth Broadband delivers fast, reliable cable and fiber internet to much of Mississippi and some of Alabama. The internet service provider (ISP) packs a ton of value in its plans, especially for smaller households. But if you want top-notch customer service, this might not be the company for you.
Sparklight, formerly known as Cable One, is a cable internet provider primarily serving suburbs and rural areas in over a dozen states. Its no-contract plans offer good download speeds to areas fiber doesn’t often reach, but its data caps aren’t ideal.
Ziply offers great pricing for medium-to-large households and absurdly fast internet for power users. This provider has a few quirks, like hidden contracts and no self-setup, but if those don’t bother you, Ziply is a solid internet service provider in the Northwestern US.
MaxxSouth offers plans ranging from 150 Mbps to an incredible 10 gigs. However, anything above 1 gig isn't yet widely available, and for good reason. Most households don't need near those speeds, and current devices can't use it anyway. So stick with MaxxSouth's 1 gig plans or lower. In fact, the slower your plan, the better the deal you get with MaxxSouth. A 150 Mbps plan costs just 28% of the national benchmark, while a 1 gig plan runs about 67% of the national benchmark (which is still a good deal). (1)
Plans come with unlimited data, decent upload speeds, and inexpensive equipment and installation—all with no contract. That’s a ton of value!
Sparklight’s no-contract cable internet plans are generally a decent value compared to other providers available in the communities the company serves. While you might not be able to get fiber in these areas, you’re likely to find DSL, satellite, or other cable internet service providers (ISPs). The speed you get for the price is comparable to other cable providers or a bit cheaper, and the performance surpasses DSL and satellite. All of this means Sparklight’s plans are worth strongly considering if your address is in one of its service areas.
We recommend choosing a Sparklight plan with at least 200 Mbps of download speed, but ideally more if it’s in your budget. Since Sparklight is a cable provider, upload speeds tend to be far below the download speeds. Upload speeds increase with each pricing tier, so if you work from home and have multiple connected devices you may want to pick one of the more expensive plans for seamless video calls.
All of Sparklight’s plans have data caps, except for its most expensive Gig plan. Data caps are typical for cable providers. While some competitors offer data caps over 1 TB for all of their plans, Sparklight’s plans have data caps that range from 100 GB to 1.5 TB. You can get 100 GB blocks of additional data for $10 during months when you need it, or you can upgrade to unlimited data with any plan for an extra $30/month. When calculating your needs, consider that the average person uses 536 GB of data per month (1).
The Gig plan offers the most data for your dollar and the highest speeds, but it’s more expensive than fiber plans with comparable download speeds, at least in some of the service areas. If you don’t want to pay top dollar, the Internet 300 and 500 plans also offer good speeds and high enough data caps for the needs of most households. We wouldn’t recommend the Internet 25 plan because its low speeds and data cap won’t comfortably meet most people’s needs.
Overall, Ziply offers fast fiber internet at great prices. Its slowest plans (50 Mbps and 200 Mbps) are the best value, priced at 25% and 33% of the national benchmark, respectively. (1) Its 1 gig plan is relatively more expensive, but it still comes in under 45% of the national benchmark for similar plans. After introductory pricing ends, your monthly bill will increase by about $20 per month, but you’ll still pay less than average. Plus, you’ll get unlimited data.
If you want the absolute fastest internet possible, Ziply also offers 2- and 5-gig plans, but these come with much higher price tags. A 2-gig plan is nearly double the cost of a 1-gig plan (no bulk discount here), and a 5-gig plan is nearly 4 times the cost! (2) And there’s no introductory pricing for these blazing-fast plans. You’ll also need to spring for your own router (the Ziply one doesn’t support these speeds). 1 gig should be more than enough speed to cover the vast majority of households, so we don’t recommend springing for these plans unless you’re sure you need them.
MaxxSouth Broadband offers cable and fiber internet plans, both of which are highly reliable. MaxxSouth’s cable plans range from 150 Mbps to 1 gig download speeds, with upload speeds from 5 Mbps to 15 Mbps, which is better than a lot of other providers.
Some MaxxSouth fiber plans boast a whopping 10 gigs (holy cannoli!) with symmetrical connections (meaning the upload speeds match the download speeds). However, it's more realistic to see actual speeds max out at around 1 gig, even if you buy a faster plan. With 10 gigs, you could host the mother of all LAN parties (can we join?) and still have mountains of leftover bandwidth.
Sparklight is available in mostly rural and suburban areas where customers probably won’t be able to get fiber internet. This makes Sparklight’s cable internet speeds the best option in some communities that are otherwise served only by DSL or satellite, which can be slow and unreliable. According to a report from Ookla, Sparklight had the highest download speeds among fixed broadband providers in North Dakota and New Mexico. (2)
Sparklight is a fiber-rich cable provider, meaning it delivers service using a mix of fiber and coaxial cables. While it can achieve download speeds of up to 940 Mbps, its upload speeds are much lower than that, reaching 50 Mbps. This is a technical limitation of cable connections that those with fiber connections won’t experience. While this isn’t ideal for households with several people who want to do heavy gaming or take video calls at the same time, Sparklight’s download and upload speeds are generally still sufficient for most households. And for regular browsing and streaming for multiple users, it's just fine. However, the data caps may hold you back if you’re a heavy internet user. Occasional outages and inconsistent speeds do affect service according to customer reports on Downdetector. (3)
Ziply has a fiber optic network, which is the most reliable kind of infrastructure out there. Fiber also allows for faster speeds than any other kind of internet, including upload speeds that are just as fast as download speeds (AKA symmetrical speed). Unfortunately, Ziply’s 1-gig plan isn’t symmetrical, serving up only 35 Mbps for upload, and that’s a shame. Still, most families will find a symmetrical 200 Mbps connection plenty fast, while high-powered users can opt for a 2- or 5-gig symmetrical plan (though it’ll cost you big).
Other than that, Ziply performs pretty well. It typically uses only 40% of its infrastructure capacity (3), which means you’re less likely to see slowdowns during peak hours. However, Ziply has legacy DSL infrastructure in some rural areas and tends to perform slower than other DSL providers.
MaxxSouth has minimal equipment and installation costs. A router/modem combo is included in your plan’s pricing, which is a rare find indeed. If you have a large home or a big family, though, you probably want to spring for this provider’s eero TrueMesh Wi-Fi, which uses multiple signal extenders placed throughout your home for the best coverage. At a reasonable $15 per month, this Wi-Fi package also includes an app that helps you find and eliminate dead spots, set parental controls, and even gives you access to remote support.
MaxxSouth’s professional installation will cost you around $20 in most cases, though if your home isn’t quite internet ready, this cost could go up. Since professional installation usually costs $70–$100 even for plug-and-play homes, that’s a sweet deal. The downside is that there’s no free self-install option, which means you’ll have to schedule an appointment. But there are worse trade-offs.
When you sign up for Sparklight internet service, you can call to schedule professional installation or choose self-installation. Both options are reasonably fast according to customer reviews. Professional installation is typically free and can be scheduled at your convenience. There's technically a $90 professional installation fee, but it is waived as part of a "permanent promotion." Self-installation is free and should take about 15 minutes once you receive your equipment in the mail.
You can choose to purchase your own Sparklight-supported modem or lease a modem from Sparklight for just over $10/month, less than some other providers. The installation cost, activation fee, and any equipment deposits may be waived for qualifying new customers.
Ziply’s equipment costs can add up. Its router/modem combo is a reasonable $10 per month, but its Whole Home Wi-Fi costs $20 per month. Sometimes, Ziply runs promotions that include Wi-Fi, so keep an eye out for those. Ziply’s Wi-Fi is Wi-Fi 6 technology, which is the best technology available. You can stream up to 12 devices at once (Wi-Fi 5 allows only up to 5). However, Ziply’s router isn’t compatible with its 2- and 5- gig plans. If you want one of these plans, you must BYO router, and not all routers are compatible, so be careful here.
Professional installation is free, which is great because Ziply doesn’t have a self-install option. Technicians will run cables from the street to your home, wire up your house, and set up your Whole Home Wi-Fi. The downside is technicians likely won’t get all this done in a single visit, so it might take a few weeks to get you up and running.
We love that installation is just $20 in most cases and that you can call into MaxxSouth customer service 24/7/365. However, some of the customer reviews suggest that the low price and availability aren’t all they’re cracked up to be. Multiple reviews cite technicians leaving holes in walls, unsightly cables, or non-functioning internet in their wake, while others say it’s hard to get a person on the phone when they call in.
MaxxSouth has some decent self-help content on its website to help you troubleshoot issues on your own, but not all issues can be solved this way. We’d love to see MaxxSouth’s customer service rise to the level of its value in other areas.
Customer experience with Sparklight is about average compared to other providers. Tech support is available 24/7 by phone or email, and there are plenty of help articles available online. Like most other providers, equipment installation is straightforward whether you have it done professionally or do it yourself.
Common complaints include unplanned outages, inconsistent speeds, and long wait times to reach Sparklight support by phone, according to user reports on Downdetector. (4) If you try Sparklight’s internet service and it doesn’t live up to expectations, the company offers a 30-day money-back guarantee.
We love that Ziply provides professional installation for free, but we’re bummed that it doesn’t even offer a self-setup option. Ziply has some great self-help content on its website for troubleshooting or changing out your router later—you just can’t use it to get started. Forcing you to use professional installation also means it takes longer to get started, and that’s tough if you’ve just moved to the area. If you’re not moving, it still means you’ll have to juggle your old service with Ziply installation times to avoid a gap in internet service.
We’re also not a fan of Ziply’s hidden contracts. It advertises no-contract plans, but if you read the fine print, you’ll pay early termination charges if you try to leave before your promotional plan ends. All that said, Ziply’s customer service is decent, and most negative reviews call out the same kinds of issues other providers get: billing disputes. (4)