EarthLink vs. Starlink Internet plan comparison





EarthLink is an interesting provider. Instead of serving internet through its own infrastructure, it partners with other internet providers to repackage their service, acting as a go-between. This means higher prices, but a reputation for great customer service might make EarthLink worth it.
Starlink has the fastest speed and lowest latency of any satellite internet service, but its availability and customer service lag behind competitors. While Starlink’s performance is impressive for satellite internet, it can’t compete with a traditional cable or fiber connection.
There’s no getting around it: EarthLink prices are almost always higher than the competition. Depending on the area, the difference can be as little as a few dollars per month, but it’s still there. That said, there are actually legitimate reasons for this.
First, EarthLink doesn’t actually have its own internet infrastructure. Instead, it partners with other local DSL and fiber internet providers, like AT&T and Frontier, and uses their infrastructure. This costs EarthLink money, and some of this naturally gets passed down to customers. In return, you’re promised a better customer experience.
The other reason is that EarthLink skips the usual promotional pricing most ISPs advertise. For example, when AT&T or Spectrum quote you a price, it’s often for an introductory period of 12 or 24 months, after which that price may increase (sometimes dramatically). EarthLink doesn’t do this, which is a plus in our book. This also means EarthLink may end up slightly less expensive if you intend to keep it for a couple of years.
Where it’s already available, Starlink is a solid alternative to other satellite internet providers. Starlink offers one home internet service plan at a flat price just over $100 per month. Starlink aims to provide download speeds of 50–250 Mbps, with speeds varying based on location, network congestion, and other technical factors. That’s up to $2.27 Mbps of speed per dollar.
While it’s more expensive than many cable or fiber plans, this is a great value compared to other satellite internet providers. HughesNet doesn’t offer speeds anywhere near as high, although some of its plans are cheaper than Starlink’s. Viasat’s highest service tier offers up to 100 Mbps download speeds, but still can’t compete on speed or price.
Like HughesNet and Viasat, Starlink has limits on how much high-speed data you can use during peak hours (7:00 am to 11:00 pm). You can get around it by logging on overnight or buying additional gigabytes of high speed data through the app.
Starlink sets itself apart, though, by being the only satellite internet company to offer an internet option for RV travelers. It costs just $25 more than the regular residential plan but may have slower speeds in busy areas.
EarthLink's performance is tough to rate. Because it is essentially reselling other providers’ services, the speed and reliability are highly dependent on which partners it uses in a given area.
That said, performance is generally good, and there are a wide range of high-speed internet plans available in most areas, so you can get exactly how much you need—up to 5 gigs in some places. Much of the service is fiber, which means performance is reliably consistent. Best of all, every plan has unlimited data, so whatever speed you opt for, you can use it without worry.
Starlink certainly can’t compete with a fiber connection, but it is more than capable of outperforming other satellite providers. Starlink’s stated performance goals are 50–250 Mbps download speed, 10–20 Mbps of upload speed, and 20–40 ms latency. These are much more ambitious goals than what HughesNet or Viasat could achieve with their geostationary satellites, but Starlink’s low-earth orbit satellite technology lets it perform beyond the limits of other satellite providers.
There are still issues with the service, though. On Downdetector, Starlink customers report suffering from occasional outages and slowdowns and speeds are slowing as more and more customers sign up. (1) The US FCC (Federal Communications Commission) has approved the launch of 7,500 more low-orbit satellites, though, so those average speeds could jump back up. (2)
According to Ookla’s satellite internet performance data from Q3 2023, Starlink outshines other satellite internet providers in terms of median download speed, upload speed, and latency. (3) Across the whole US, Starlink’s median download speed was 53 Mbps, down from about twice that the year before. That's still faster than HughesNet and Viasat, but about 100 Mbps slower than fixed broadband. While median download speed varied widely by location, it still remained within advertised ranges.
Starlink’s median upload speed (7.22 Mbps) was much higher than both HughesNet and Viasat. As expected, Starlink’s latency (67 ms) was remarkably lower than other satellite internet providers, but not as low as fixed broadband providers.
This is another category that’s tough to rate. Since EarthLink partners with other internet service providers (ISPs) to provide service, it doesn’t actually issue its own equipment. Instead, you’ll get equipment from whichever partner EarthLink uses in your area. The good news is that EarthLink does set the fees, and they’re reasonable: $9.95 per month.
It’s a similar story for installation—your service will be installed and set up by a rep from the partner company, not EarthLink itself. The installation fee is $79.95, which isn’t the highest we’ve seen. That said, we’d rather see installation included in the price, particularly since EarthLink’s overall prices tend to be on the high side. Self-install is available only in some service areas.
Unlike other satellite internet providers, Starlink does not require or even offer professional installation. Instead, you will be sent a Starlink Kit that contains all the hardware you need to install a Starlink dish yourself. Although the kit comes with a satellite dish and a base, you may want to purchase a mount to place the dish above ground level for a clearer view of the sky.
If you need internet while traveling, you'll need Starlink's kit for RVs.
To install Starlink, download the app on your phone and follow the instructions to find an unobstructed view and complete the setup. The do-it-yourself installation is designed to be straightforward, but it can take several hours. If technical issues arise, you can turn to Starlink customer support or an unofficial online community for help.
Unlike HughesNet and Viasat, Starlink doesn’t offer a leasing option for its equipment. Instead, customers have to buy the basic Starlink Kit for a high upfront cost of $599. That averages to about $25 per month if you spread the cost over two years, and that's higher than you'll pay for Viasat or HughesNet equipment. For a high-performance Starlink kit that can handle both freezing weather and temperatures above 95 degrees Fahrenheit, the setup cost starts at $2,500 before taxes.
Customer service is where EarthLink really shines. The company claims to prioritize customer service and experience, and users seem to agree. The company actually ranks first in some user-driven surveys of internet satisfaction, beating out providers like AT&T and Verizon despite the higher prices.
From a practical standpoint, it seems that EarthLink representatives are friendlier, more helpful, and more knowledgeable than those we’ve dealt with at other companies. However, we've seen reports that some customers don't get the Earthlink customer experience. In some places, customer service is handled by the end provider instead.
Starlink’s customer support seems to be struggling to keep up with the needs of its growing customer base. Along with sometimes inconsistent speeds and connectivity issues, this is leading to mixed experiences with the service.
Elon Musk, CEO of Starling recently said delays were most common in highly populated areas, but rural areas were the best place for the service, anyway. (4) There have also been reports of long delays in receiving Starlink equipment due to the effects of the global chip shortage on production. (5) Some customers who pre-ordered Starlink kits have had to wait over a year to receive them and received few updates from the company (6), but you can look up your address using this Starlink map to find out what to expect.
Other internet providers tend to offer more customer support options and be more reachable than Starlink. Starlink’s website does offer a customer support FAQ section, but there is no public contact phone number or email address. To contact the company directly for assistance, you have to log in and send customer support a message. On the plus side, it is possible to find help elsewhere. Starlink has an enthusiastic community of users who post helpful videos on YouTube and answer questions on Reddit.