Cox provides a great customer experience and reliable speeds, but you’ll spend more for higher-speed plans, extra data, and add-ons.
Starlink uses new low-orbit technology to deliver satellite internet to customers around the globe. The company got its start offering faster speeds and much lower latency than other satellite providers, but now offers download speeds comparable to those offered by other satellite providers. Starlink still offers decently low latency for satellite, but it can’t compete against fiber or cable internet providers.
Cox plans range from around $0.60/Mbps for low-speed plans to around $0.10/Mbps for the fastest plan, which is more expensive than other cable internet providers. The good news? Cox has more lower-speed plan options, so if your internet budget tops out at $50 a month, Cox might be your new best friend. At speeds of 200 Mbps and above, however, Cox loses the price war.
What you get for the money is pretty good. All plans have a 1.25 TB data cap (unless you pay an extra $50 per month for unlimited), but that’s more than most people need. And unlike providers where unlimited comes standard, Cox won’t throttle your speed if you get a little data-hungry. Just beware of overage charges (which can really add up) if you go over the limit.
Starlink offers a variety of internet plans in four main categories: Standard, Priority, Mobile, and Mobile Priority. Its Standard plan is decent for home internet if you don’t have any fiber or cable internet options, but it will cost $90–$120. The Mobile plan is intended for RVs and travelers. These standard plans aren’t subject to official data caps, which is a nice change! If you go with the mobile option, you can pause it month to month but your traffic will be deprioritized relative to home and priority users.
Starlink’s most expensive plans are now named Priority plans, and there’s one for fixed locations and one for use on the go. Both have data caps, and both require a spendy high-performance receiver. Both plans cost at least $250 per month, with increased rates if you need more high-speed data. That’s some of the most expensive prices we’ve seen for internet anywhere, so these plans are pretty hard to recommend for most households.
Satellite internet provider Viasat has plans that are priced similarly to Starlink's standard options, but with data caps and much higher latency. That means that, while you can get a Viasat plan of 100 Mbps in some places, your connection will still feel very slow because it takes so long for data to get to and from the high-orbit satellites. HughesNet, the other big satellite provider in the US, has pricing similar to Starlink's but strict data caps and download speeds that reach only 25 Mbps.
Even with its benefits compared to other satellite providers, Starlink earned a pretty low score on value because the service is much slower and more expensive than home internet from cable or fiber internet providers. It doesn’t compete very well against DSL or fixed wireless internet either, but it’s a decent option of last resort if you are a digital nomad or live in a rural area.
Generally, Cox delivers the speeds it says it does, sometimes even a bit higher—though the speed you experience also depends on lots of factors, such as the equipment you’re using and your distance from the router.
Cox specializes in cable internet, which is faster than DSL and satellite, but slower and less reliable than fiber. It’s also typically cheaper and more reliable than wireless internet. The US Federal Communication Commission, in fact, says actual speeds from Cox are faster than advertised and nearly identical to competitor Optimum. Those speeds are stable, too. The report found slowdowns less than 5% of the time. (1) However, cable internet is known to be slower during peak usage times because you and your neighbors are all using the same street lines.
Starlink once offered download speeds that were much, much faster than what satellite competitors could offer, but the company changed its plans and pricing in May of 2023. Today, the service sells home internet with download speeds of 25–100 Mbps, upload speeds of 5–10 Mbps, and latency in the range of 25–50 ms. Those speeds look fast enough for gaming and video conferencing on paper, but third-party research from Ookla found that Starlink users are getting average download speeds of about 66 Mbps, upload speeds of nearly 8 Mbps, and latency of a 62 ms in the first quarter of 2023. That kind of service might be good enough for online shopping or even streaming one show in high definition, but you wouldn’t be able to make video calls, play some online games, or livestream your gameplay. (1)
That same study showed Starlink performed better on all speed metrics than competitors Viasat or HughesNet, but was worse than cable and fiber providers across the board. Unfortunately, Starlink speeds are slowing as the company adds new subscribers because of network congestion. The change in plan offerings is the best evidence of that, but it's not hopeless. The company has launched nearly 4,000 satellites and is planning new launches with updated V2 equipment it says will improve reliability and handle much more bandwidth. (2)
Cox’s Panoramic Wi-Fi Gateway ($13/month to rent) is a modem and router in one, and you can purchase (but not rent) additional Wi-Fi pods ($129.99 each) that plug into a regular power outlet to reduce dead spots in your home. Because these pods can be used only with Cox, they're only an ideal solution if you plan to be with Cox for several years. The good news is Cox is also compatible with tons of other modems and routers, so you could save a few bucks while using your own gear.
With Cox, a self-installation kit is free. But if getting set up on your own makes you sweat, a Cox professional can install it for $100... but that installation cost goes up if your home isn’t already wired up and ready to go. They’ll ensure cabling makes it from the street into your home, but you might need to hire a contractor or handyman to run wires to a specific room.
Unlike other satellite internet providers, Starlink does not require (or even offer) professional installation. Instead, you will be sent a Starlink Kit that contains all the hardware you need to install a Starlink dish yourself. Although the kit comes with a satellite dish and a base, you may want to purchase a mount to place the dish above ground level for a clearer view of the sky.
If you need internet while traveling, you'll need one of Starlink’s mobile plans. If you don’t need to use the receiver while you’re traveling faster than 10 miles per hour, you can stick with the basic $600 model. If you need internet while your RV or boat is moving, though, you’ll need one of the Mobile Priority plans and the required high-performance receiver.
To install Starlink, download the app on your phone and follow the instructions to find an unobstructed view and complete the setup. The do-it-yourself installation is designed to be straightforward, but it can take several hours. If technical issues arise, you can turn to Starlink customer support or an unofficial online community for help.
Unlike HughesNet and Viasat, Starlink doesn’t offer a leasing option for its equipment in the US, or require an activation fee. Instead, customers have to buy the basic Starlink Kit for a high upfront cost of $599. That averages to about $25 per month if you spread the cost over two years, which is more than you would pay for Viasat or HughesNet equipment. If you need the high-performance Starlink kit because of either extreme weather or your Priority service plan, setup starts at $2,500 before taxes.
Reviews for internet service providers are notoriously low in general, but Cox does pretty well according to our real customer reviews. The American Customer Satisfaction Index (ASCI) ranks Cox ninth in customer satisfaction among internet service providers—the same as Frontier. (2) That's lower than average, but not by much.
We think Cox’s 30-day, no hassle money-back guarantee is solid. And in our own experience with Cox, we've had solid customer service interactions. If you opt for self-installation, you can still get plenty of help online or by phone if needed. But if you use your own gear or technology isn’t your thing, $10/month will get you extra help, day or night, for things like malware removal, software installation and reconfiguration, and general troubleshooting.
Starlink’s customer support seems to be struggling to keep up with the needs of its growing customer base. Along with sometimes inconsistent speeds and connectivity issues, this is leading to mixed experiences with the service.
Elon Musk, CEO of Starlink, recently said delays were most common in highly populated areas, but rural areas are the best place for the service, anyway. (3) There have also been reports of long delays in receiving Starlink equipment due to the effects of the global chip shortage on production. (4) Some customers who pre-ordered Starlink kits have had to wait more than a year to receive them and received few updates from the company (5), but you can look up your address using this Starlink map to find out what to expect.
Other internet providers tend to offer more customer support options and be more reachable than Starlink. Starlink’s website offers a customer support FAQ section, but there is no public contact phone number or email address. To contact the company directly for assistance, you have to log in and send customer support a message. On the plus side, it is possible to find help elsewhere. Starlink has an enthusiastic community of users who post helpful videos on YouTube and answer questions on Reddit.