BendBroadband offers a surprisingly strong internet service to the towns around Bend, Oregon. Despite the occasional customer service issue, we think it’s one of the most compelling options in the area.
Starlink uses new low-orbit technology to deliver satellite internet to customers around the globe. The company got its start offering faster speeds and much lower latency than other satellite providers, but now offers download speeds comparable to those offered by other satellite providers. Starlink still offers decently low latency for satellite, but it can’t compete against fiber or cable internet providers.
BendBroadband looks like a local brand, but it's actually owned by TDS, which services over 1,000 communities across the country(1). Still, it offers a surprisingly strong value proposition. BendBroadband's plans are competitively priced, there are no contracts required, and the installation and equipment fees are reasonable. Taken together, it feels like you get your money’s worth, which is ultimately the most important thing when assessing value.
Our one knock here is that there’s no true budget plan available for those who don’t need 300+ Mbps internet. For single-person households, 100 Mbps is often plenty fast, so this could be a drawback if you live alone—or with a couple of people who don't stream a lot or work from home.
Starlink offers a variety of internet plans in four main categories: Standard, Priority, Mobile, and Mobile Priority. Its Standard plan is decent for home internet if you don’t have any fiber or cable internet options, but it will cost $90–$120. The Mobile plan is intended for RVs and travelers. These standard plans aren’t subject to official data caps, which is a nice change! If you go with the mobile option, you can pause it month to month but your traffic will be deprioritized relative to home and priority users.
Starlink’s most expensive plans are now named Priority plans, and there’s one for fixed locations and one for use on the go. Both have data caps, and both require a spendy high-performance receiver. Both plans cost at least $250 per month, with increased rates if you need more high-speed data. That’s some of the most expensive prices we’ve seen for internet anywhere, so these plans are pretty hard to recommend for most households.
Satellite internet provider Viasat has plans that are priced similarly to Starlink's standard options, but with data caps and much higher latency. That means that, while you can get a Viasat plan of 100 Mbps in some places, your connection will still feel very slow because it takes so long for data to get to and from the high-orbit satellites. HughesNet, the other big satellite provider in the US, has pricing similar to Starlink's but strict data caps and download speeds that reach only 25 Mbps.
Even with its benefits compared to other satellite providers, Starlink earned a pretty low score on value because the service is much slower and more expensive than home internet from cable or fiber internet providers. It doesn’t compete very well against DSL or fixed wireless internet either, but it’s a decent option of last resort if you are a digital nomad or live in a rural area.
Performance-wise, BendBroadband holds its own against competing internet service providers. There are plans available ranging from 300 Mbps to 1 Gbps, and reports indicate that the service is reliable. If we had to knock BendBroadband for anything performance-wise, it would be a lack of speeds above 1 Gbps—some cable competitors are offering up to 2 Gbps speeds, and we’d like to see the same from BendBroadband. These faster speeds can be useful for customers who download a large number of media files or frequently watch multiple concurrent 4K streams, for example. There are also data caps to be aware of, with overage charges up to $30 per month.
Starlink once offered download speeds that were much, much faster than what satellite competitors could offer, but the company changed its plans and pricing in May of 2023. Today, the service sells home internet with download speeds of 25–100 Mbps, upload speeds of 5–10 Mbps, and latency in the range of 25–50 ms. Those speeds look fast enough for gaming and video conferencing on paper, but third-party research from Ookla found that Starlink users are getting average download speeds of about 66 Mbps, upload speeds of nearly 8 Mbps, and latency of a 62 ms in the first quarter of 2023. That kind of service might be good enough for online shopping or even streaming one show in high definition, but you wouldn’t be able to make video calls, play some online games, or livestream your gameplay. (1)
That same study showed Starlink performed better on all speed metrics than competitors Viasat or HughesNet, but was worse than cable and fiber providers across the board. Unfortunately, Starlink speeds are slowing as the company adds new subscribers because of network congestion. The change in plan offerings is the best evidence of that, but it's not hopeless. The company has launched nearly 4,000 satellites and is planning new launches with updated V2 equipment it says will improve reliability and handle much more bandwidth. (2)
BendBroadband has jumped on the mesh network bandwagon and offers what it calls TDS Wi-Fi+. For those unfamiliar with the term, a mesh network is a system of multiple wireless routers that help spread your network over a larger area without losing signal strength. The result is fuller coverage of your entire home, with no weird dead spots or dropped connections. It’s often a big improvement on traditional single-router setups.
The TDS Wi-Fi+ set up is about $15 per month, plus $5 per month for each additional extender you need (most homes should be fine with the default). Customers can opt for a cheaper, standard equipment setup for $10 per month. However, many customers report problems with this router and opt to get their own(2).
BendBroadband also offers options for installation. You can opt for a free self-install kit. Or you can choose professional installation for around $50, which is one of the lower installation fees we’ve seen. In areas that aren’t eligible for self-install, the professional fee is waived, so it won’t cost you anything to get set up.
Unlike other satellite internet providers, Starlink does not require (or even offer) professional installation. Instead, you will be sent a Starlink Kit that contains all the hardware you need to install a Starlink dish yourself. Although the kit comes with a satellite dish and a base, you may want to purchase a mount to place the dish above ground level for a clearer view of the sky.
If you need internet while traveling, you'll need one of Starlink’s mobile plans. If you don’t need to use the receiver while you’re traveling faster than 10 miles per hour, you can stick with the basic $600 model. If you need internet while your RV or boat is moving, though, you’ll need one of the Mobile Priority plans and the required high-performance receiver.
To install Starlink, download the app on your phone and follow the instructions to find an unobstructed view and complete the setup. The do-it-yourself installation is designed to be straightforward, but it can take several hours. If technical issues arise, you can turn to Starlink customer support or an unofficial online community for help.
Unlike HughesNet and Viasat, Starlink doesn’t offer a leasing option for its equipment in the US, or require an activation fee. Instead, customers have to buy the basic Starlink Kit for a high upfront cost of $599. That averages to about $25 per month if you spread the cost over two years, which is more than you would pay for Viasat or HughesNet equipment. If you need the high-performance Starlink kit because of either extreme weather or your Priority service plan, setup starts at $2,500 before taxes.
Living with BendBroadband has its ups and downs. The day-to-day experience is solid for most customers, and the speeds seem to be consistent with what’s advertised. However, a few customers complain about regular price hikes and unreliable service that drops occasionally. Some customers also report poor customer service over the phone.
Because BendBroad is now owned by TDS, we would expect some changes in customer service moving forward. However, TDS rates about the same for customer service as Bend, so you may experience different issues and still feel the overall level of satisfaction.
Starlink’s customer support seems to be struggling to keep up with the needs of its growing customer base. Along with sometimes inconsistent speeds and connectivity issues, this is leading to mixed experiences with the service.
Elon Musk, CEO of Starlink, recently said delays were most common in highly populated areas, but rural areas are the best place for the service, anyway. (3) There have also been reports of long delays in receiving Starlink equipment due to the effects of the global chip shortage on production. (4) Some customers who pre-ordered Starlink kits have had to wait more than a year to receive them and received few updates from the company (5), but you can look up your address using this Starlink map to find out what to expect.
Other internet providers tend to offer more customer support options and be more reachable than Starlink. Starlink’s website offers a customer support FAQ section, but there is no public contact phone number or email address. To contact the company directly for assistance, you have to log in and send customer support a message. On the plus side, it is possible to find help elsewhere. Starlink has an enthusiastic community of users who post helpful videos on YouTube and answer questions on Reddit.