Brightspeed vs. Ziply Fiber Internet plan comparison




We were extremely impressed with Brightspeed’s prices—you’ll be hard-pressed to find a better deal on gigabit fiber internet. While its fiber coverage area is growing, it currently remains very small. Plus, it's a brand-new provider so there are still a lot of unknowns.
Ziply offers great pricing for medium-to-large households and absurdly fast internet for power users. This provider has a few quirks, like hidden contracts and no self-setup, but if those don’t bother you, Ziply is a solid internet service provider in the Northwestern US.
Brightspeed is slowly building out a fiber network that offers a pretty great value at $65 per month for up to 940 Mbps. That’s just 7 cents per Mbps, which puts it right in line with top fiber providers like AT&T. Unfortunately, this fiber service is still not widely available.
Because Brightspeed’s fiber footprint is still fairly small, the vast majority of Brightspeed’s current service offerings are DSL. That means that you’re going to pay more money for less speed—it’s just the nature of the DSL beast.
The upshot is that Brightspeed’s DSL prices are actually pretty competitive, starting at $50 per month. With advertised speeds of up to 140 Mbps (but often lower, depending on where you live), that puts the provider at about 36 cents per Mbps. This, of course, falls far short of most cable and fiber providers.
Learn more about the differences between fiber and DSL internet.
Overall, Ziply offers fast fiber internet at great prices. Its slowest plans (50 Mbps and 200 Mbps) are the best value, priced at 25% and 33% of the national benchmark, respectively. (1) Its 1 gig plan is relatively more expensive, but it still comes in under 45% of the national benchmark for similar plans. After introductory pricing ends, your monthly bill will increase by about $20 per month, but you’ll still pay less than average. Plus, you’ll get unlimited data.
If you want the absolute fastest internet possible, Ziply also offers 2- and 5-gig plans, but these come with much higher price tags. A 2-gig plan is nearly double the cost of a 1-gig plan (no bulk discount here), and a 5-gig plan is nearly 4 times the cost! (2) And there’s no introductory pricing for these blazing-fast plans. You’ll also need to spring for your own router (the Ziply one doesn’t support these speeds). 1 gig should be more than enough speed to cover the vast majority of households, so we don’t recommend springing for these plans unless you’re sure you need them.
Impressive is definitely the right word to describe Brightspeed’s performance. The fiber service is excellent, with symmetrical speeds up to 940 Mbps. Symmetrical speed means the upload and download speeds are equal, which makes for much better overall performance compared to typical services where upload is significantly slower.
The DSL service is competitive with most other DSL providers, and seems to be fairly reliable—although we have heard some complaints of outages and interruptions. That said, it is DSL, so you’re only going to get limited speeds.
Our main concern with Brightspeed’s performance is simply how new the company is. It hasn’t had a chance to prove itself yet, and there may be growing pains as it builds out its fiber network. That said, we don’t expect many issues with DSL, since Brightspeed basically inherited the infrastructure directly from CenturyLink.
Ziply has a fiber optic network, which is the most reliable kind of infrastructure out there. Fiber also allows for faster speeds than any other kind of internet, including upload speeds that are just as fast as download speeds (AKA symmetrical speed). Unfortunately, Ziply’s 1-gig plan isn’t symmetrical, serving up only 35 Mbps for upload, and that’s a shame. Still, most families will find a symmetrical 200 Mbps connection plenty fast, while high-powered users can opt for a 2- or 5-gig symmetrical plan (though it’ll cost you big).
Other than that, Ziply performs pretty well. It typically uses only 40% of its infrastructure capacity (3), which means you’re less likely to see slowdowns during peak hours. However, Ziply has legacy DSL infrastructure in some rural areas and tends to perform slower than other DSL providers.
Brightspeed installation is relatively straightforward. The professional installation has a $99 fee attached, which is pretty standard, but self-installation is free. You’ll probably have to go for the pro install with a fiber plan, since you’ll need an optical network terminal (ONT) installed.
For DSL service, you have a choice of professional installation or self-installation, though you can only self-install DSL service if you already have a phone jack in your home. If you don’t, a technician will have to come out and add one.
The equipment is also straightforward. You get a basic wireless gateway (a combination modem and router) that’ll get you online and handle the speeds for your plan. There are none of the mesh systems and other fancy extras some providers offer, but it’ll do the job. Equipment rental will run you $15 per month, which is fairly standard.
That’s kind of the theme with Brightspeed’s equipment and installation process. There’s nothing bad or out of the ordinary, but there’s also nothing particularly interesting or exciting about it.
Ziply’s equipment costs can add up. Its router/modem combo is a reasonable $10 per month, but its Whole Home Wi-Fi costs $20 per month. Sometimes, Ziply runs promotions that include Wi-Fi, so keep an eye out for those. Ziply’s Wi-Fi is Wi-Fi 6 technology, which is the best technology available. You can stream up to 12 devices at once (Wi-Fi 5 allows only up to 5). However, Ziply’s router isn’t compatible with its 2- and 5- gig plans. If you want one of these plans, you must BYO router, and not all routers are compatible, so be careful here.
Professional installation is free, which is great because Ziply doesn’t have a self-install option. Technicians will run cables from the street to your home, wire up your house, and set up your Whole Home Wi-Fi. The downside is technicians likely won’t get all this done in a single visit, so it might take a few weeks to get you up and running.
If one area will make or break Brightspeed, it’s customer experience. The provider got its start by acquiring a large number of DSL markets from CenturyLink, so a lot of customers had their internet service transition from one provider to another. A sudden shift in customer experience here could have been really bad.
Opinions of the service are quite mixed so far. Some customers seem to be having a fine experience, with no noticeable change from how things were with CenturyLink. Others have had a rockier transition, with major complaints about speed and customer service.
These types of reports may give you pause, but since the provider is new and the transition from CenturyLink is still happening, things may improve.
We love that Ziply provides professional installation for free, but we’re bummed that it doesn’t even offer a self-setup option. Ziply has some great self-help content on its website for troubleshooting or changing out your router later—you just can’t use it to get started. Forcing you to use professional installation also means it takes longer to get started, and that’s tough if you’ve just moved to the area. If you’re not moving, it still means you’ll have to juggle your old service with Ziply installation times to avoid a gap in internet service.
We’re also not a fan of Ziply’s hidden contracts. It advertises no-contract plans, but if you read the fine print, you’ll pay early termination charges if you try to leave before your promotional plan ends. All that said, Ziply’s customer service is decent, and most negative reviews call out the same kinds of issues other providers get: billing disputes. (4)